Detailed introduction of mold laser welding machine！

Mold laser welding machine and repair machine repair and weld cracks, broken corners, edges and damaged sealing edges of hard materials such as molds, precision injection molding, die casting, stamping, stainless steel, etc. at a temperature of 50-60 Rockwell; high accuracy, laser welding spot diameter is only 0.2mm~1.5mm; small heating area, workpiece will not deform; etching can be done after welding without affecting the effect.

Mold laser welding machine configuration and processing technology:

When the mold laser welding machine is repairing the mold, attention should be paid to how to meet the repair accuracy and repair quality. The control system of the mold laser welding machine plays a key role.

1. The mold laser welding machine should be monitored and operated with a 10X or 15X microscope.

2. The power supply of the mold laser welding machine can adopt a waveform adjustable function, which is suitable for welding different materials. Such as: mold steel, stainless steel, beryllium copper, aluminum, etc.

3. CCD system (camera system) can be used for monitoring. The function is: in addition to the operator observing from the microscope, non-operating personnel can watch the entire welding process through the display screen of the camera system. This device is beneficial to the technical training and exhibition demonstration of non-operating personnel, and has a good promotion effect on the promotion of laser welding technology.

4. It can melt welding wires of different diameters, from 0.2-0.8 in diameter.

5. The mold laser welding machine must use argon protection, and the program must be set to first emit argon and then laser to prevent the first pulse laser from oxidizing during continuous processing.

6. The parameters that can be set for the power supply of TFLASER mold laser welding machine are: current 50-400A, pulse width 0.1-20MS, frequency 0-50. The processing parameters for normal mold welding are as follows: current: 90-120; pulse width: 4-6; frequency 5-10. When welding beryllium copper and aluminum, the current increases by 30-50A

7. When laser welding molds, the most common problem is bite marks around the welding area. Laser blanking should be used to blank the welding area to cover the changes that may cause bite marks to prevent the appearance of bite marks. The spot can exceed the edge of the welding position by 0.1mm.

Related product links

Fiber Laser Welding Machine