How to prevent the cutting performance of fiber laser cutting machine from decreasing?

With the development of laser cutting technology, fiber laser cutting machines are widely used. During use, we will also find some problems, such as slow cutting speed and poor cutting accuracy. This may be because the fiber laser cutting machine causes loss during long-term use, which in turn affects the cutting performance. Let's analyze the reasons for the decline in cutting performance of the fiber laser cutting machine.

1. Power: After the machine is used for a long time, the power of the laser will decrease more or less, which will directly affect the cutting performance of the laser cutting machine;

2. Distance: The distance between the workpiece and the nozzle also affects the cutting effect of the laser cutting machine, so it is necessary to adjust the appropriate distance without affecting the cutting performance;

3. Position: The focal position directly affects the cutting progress. The diameter of the focal spot should be as small as possible, thereby producing a narrow slit. If the cutting performance decreases, adjusting the focal position is a good method;

4. Long-term overload production, lack of maintenance and improper operation of the operator are all reasons for the decline in cutting equipment performance.

In summary, we have found the reasons for the decline in the performance of the laser cutting machine, so we can prescribe the right medicine and take preventive measures to timely and effectively avoid or slow down the decline in cutting performance.

1. Pay attention to the maintenance of the machine. Long-term processing of the fiber laser cutting machine will cause wear of the parts, which will inevitably affect the cutting performance of the machine. Therefore, daily maintenance is very important. You can perform daily maintenance according to the daily maintenance table of the production company.

2. Standardize the operation of the machine. Now the larger fiber laser cutting machine manufacturers will let customers arrange special personnel to receive training and train the machine operation process. Only after the training is qualified will they be arranged to work on the job. Special operation is not only conducive to the normal operation of the fiber laser cutting machine, but also effectively avoids safety accidents.