News Cutter News
Contact us
No.609, Centre Of Huijin Nanxiang, Yinxiang Road, Nanxiang Town, Jiading District, Shanghai, China
sherry@sanmachines.com
+86-18616767021

Plywood Laser Cutting and Engraving Machine

CO2 laser cutting machines for plywood can greatly simplify the processing of this material: the processing is faster and more precise than manual or mechanical methods. The process itself is cleaner and does not produce debris, and automation allows for repeatability in production.


CO2 laser cutting machines


However, it also has disadvantages: the laser cannot cut the knots that sometimes appear on plywood; smoke is produced during operation, and there may be a burning smell.

 

The most common problems are edge burns and overburning. But these problems can be solved.

There are many types of laser-cut plywood. Birch, bamboo, beech, pine, cherry, etc. Their characteristics may determine your choice.

 

There is an important rule when cutting plywood with a laser: the smaller the heat-affected zone, the fewer burn marks along the cutting line.



Powerful lasers evaporate the material quickly, which reduces the time required to process the workplace. In addition, the narrow laser spot increases the energy density, allowing the laser to cut the material faster.

For laser cutting of plywood, tube wattages of 60-100 are usually used.

 

Generally speaking, 10 W of power can cut 1 mm of plywood. However, it is not recommended to run continuously at 100% power as this will shorten the life of the tube. It is recommended not to exceed 85% power.

 

Air assist is essential for particle removal, increased cutting speed, and protection of the focusing lens. We recommend setting the air assist to 1.5-2 atmospheres.

 

A lot of smoke is generated during the cutting process, which affects the laser operation. A good extraction system is essential for the effective removal of smoke and harmful fumes

 

Choose the size of the plywood laser cutting machine according to the expected production needs. Choose the tube material according to the material thickness. Make sure the plywood laser cutting machine has a good extraction and air assist system.


Related product links

CO2 Laser Cutting Machine