What are the best practices for managing the cooling system and water tank of a laser cutting machine?

The best practices for managing the cooling system and water tank of a laser cutting machine include the following:

1. Clean the water tank regularly and replace the circulating water:

In order to keep the laser cutting machine working properly and extend its service life, it is necessary to clean the water tank regularly and replace the circulating water.

The specific operation is to turn off the power, unplug the water inlet pipe, let the water in the laser tube flow into the water tank automatically, then open the water tank to take out the water pump, remove the dirt on the water pump, and replace the circulating water after cleaning the water tank.

2. Use a closed-loop cooling system with a dual temperature control system:

In order to maintain the best performance of the fiber laser cutting machine, a closed-loop cooling system with a dual temperature control system can be used, which performs well in keeping the fiber laser cutting machine cool.

3. Pay attention to the ion exchange column in the cooling system:

During long-term use, the status of the ion exchange column in the cooling system should be observed frequently to ensure the effective operation of the cooling system.

4. Winter maintenance:

When encountering a strong cold wave or not using the laser cutting machine for a long time, you should pay attention to the flow components in the cooling system to ensure that the equipment can perform at its best even in harsh cold environments.

5. Drain cooling water:

Before shutting down the laser cutting machine, you should actively drain the cooling water with a chiller to avoid problems caused by water freezing.