What should metal laser cutting machines pay attention to when doing typesetting?

When using a laser cutting machine for material processing, it is generally necessary to import the drawings into the system, and then use the typesetting software to correct the graphics as much as possible. In this way, batch processing can be carried out through the cutting machine. Although this is more convenient, it is very important for typesetting. Although it only takes a few seconds to achieve cutting and typesetting, there are still many knowledge contained in it. What should metal laser cutting machines pay attention to when doing typesetting will be introduced below.

1. Corner melting

When a metal laser cutting machine cuts corners, it may cause the corners to melt and become rounded due to overheating. There will be a small radius at the corner. In order to maintain the high-speed cutting of the laser and avoid staying at the corner for too long to cause melting, you need to pay more attention to this when doing typesetting, which can improve both quality and overall efficiency.

2. Common edge cutting

Arrange the same single part edge or multiple parts in parallel, so that when cutting, only one edge is needed, which also reduces the waste caused by multiple segmentation of parts, thereby reducing the path and improving the overall cutting efficiency.

3. Do a good job of residual material processing

After the parts are cut, the parts should be removed from the workbench as soon as possible to facilitate subsequent cutting. When the metal laser cutting machine is cutting, the skeleton and waste should be separated, so that the work can be completed in a shorter path. In addition, the volume and weight of the waste will be reduced, which is also convenient for unloading.

You should already know what problems should be paid attention to when the metal laser cutting machine is typesetting. In addition to the above problems, you should also do a good job of lead setting, part spacing and part collision.