Laser cutting machines will face loss problems in long-term use. Machine wear will affect cutting speed, cutting accuracy and cutting effect. The following are the problems and countermeasures that may occur when using laser cutting machines:1. Long-term use will cause the laser ...

The working principle of the laser cutting machine is to release energy when the laser beam is irradiated onto the surface of the workpiece to melt and evaporate the workpiece to achieve the purpose of cutting and engraving. The laser cutting machine has the characteristics of sa...

Carbon steel is an iron-carbon alloy with a carbon content of 0.0218% to 2.11%. Theoretically, the higher the carbon content in carbon steel, the greater the hardness, the higher the strength, and the lower the plasticity. So what are the advantages of fiber laser cutting ma...

The protective lens of the laser welding machine is consumable, so it needs to be replaced regularly. However, due to the influence of the process/technique/setup, etc., it may cause damage by slag retrieval. In rare cases, abnormal laser light output and other factors may a...

1.The speed of the marking machine: This refers to the speed of the laser scanning galvanometer. This speed refers to the speed that can be adjusted in the parameters, rather than the overall speed of marking a product. Because the overall marking speed is not only adjusted by th...

During the operation, choosing different parameters and marking workpieces of different materials will affect the marking depth of the laser marking machine, sometimes resulting in the marking effect being too shallow or too deep. In fact, the marking depth of the laser marking m...

During long-term use of the Aurora cutting machine, some problems will always occur. So what are the frequently encountered machine problems and basic solutions?1. The laser cutting head does not emit lighta) Check whether the water circulates normally and allow the water to circ...

1. The cooling system should be grounded, and the water tank and waterway should be cleaned frequently. The temperature control point of the refrigeration temperature control water tank should be reasonable. Otherwise, the laser tube will be easily damaged and the power will be r...

Laser marking machines can be divided into flying laser marking machines and static laser marking machines. These two laser marking machines work on the same principle.Laser marking machines can be divided into flying laser marking machines and static laser marking machines. Thes...

1. Comparison of application scopeLaser cutting machines have a wide range of applications. They can cut both metals and non-metals. CO2 laser cutting machines can be used to cut non-metals, such as cloth and leather, and fiber laser cutting machines can be used to cut metals. Th...