News Cutter News
Contact us
No.609, Centre Of Huijin Nanxiang, Yinxiang Road, Nanxiang Town, Jiading District, Shanghai, China
sherry@sanmachines.com
+86-18616767021

How to prevent the decline of cutting performance of fiber laser cutting machine?

With the development of laser cutting technology, fiber laser cutting machine has been widely used. In the process of use, we will also find some problems, such as reduced slicing speed and delicate cutting. It may be because of the fiber laser. The cutting machine causes loss during long-term use, thus affecting the slicing performance. Let's analyze the reasons for the decline of cutting performance of fiber laser cutting machine.

 

fiber laser cutting machine


1. Power: After a long time of use, the laser power of the machine will decline more or less, which will directly affect the slicing performance of the laser cutting machine.

 

2. Distance: The distance between the workpiece and the beam tube also affects the cutting effect of the laser cutting machine, so it is necessary to adapt to the appropriate distance and not affect the slicing performance.

 

3. Position: The position of the positioning focus directly affects the slicing progress. The periphery of the focus should be as small as possible, which will produce narrow tearing. If the slicing performance declines, the position that meets the focus is a good system.

 

4. Long-term load, no maintenance, and irregular operation of the driver are all reasons for the decline in the performance of the cutting device.

 

In summary, we have found the reasons for the decline in the performance of the laser cutting machine, so we can take timely and preventive measures to effectively avoid or slow down the decline in cutting performance.

 

Generally, attention should be paid to the maintenance of the machine. Long-term processing of the fiber laser cutting machine will cause wear and tear and corridor cutting, which will inevitably affect the performance of the machine slices, and daily maintenance is also very important. Daily maintenance should be carried out according to the daily maintenance table of the product company.

 

Standardization of machine operation. Now the larger fiber laser cutting machine manufacturers will allow customers to arrange special training, training machine operation procedures, and arrange on-the-job operation only after qualified training. Specialized operation is not only conducive to the normal operation of the fiber laser cutting machine, but also effectively avoids safety accidents.


Related product links

CO2 Laser Cutting Machine