Summer maintenance measures for fiber laser cutting machines！

After entering the summer, the temperature is getting higher and higher, so how should the fiber laser cutting machine be maintained in the hot temperature? This article provides you with the maintenance methods of metal laser cutting machines in the high temperature of summer.

1. Check the cooling system of the laser cutting machine

In high temperatures in summer, the working pressure of the cooling system of the metal laser cutting machine increases. SAN LASER engineers recommend that you check the internal pressure of the chiller before the high temperature arrives.

Note: The chiller pressures of different laser cutting machine manufacturers are different. It is recommended to consult the manufacturer for specific parameters before maintenance.

2. Check the cooling fan of the laser cutting machine

The dust of the fiber laser cutting machine is mainly metal powder. It is recommended to clean the dust in the laser cutting machine cabinet regularly. Check whether the cooling fan is running well to ensure that the heat dissipation is normal.

3. Cleaning the scale of the laser cutting machine

At high temperatures, the cooling water deteriorates faster. Customers using laser cutting machines should regularly use distilled water or pure water to clean the scale to prevent the laser source and water pipes from attaching scale and affecting the laser power.

Note: Different laser cutting machine models have different cleaning methods. Please operate 

4. Note that the difference between the cooling water temperature and the air temperature cannot be too large.

The laser and optical lens of the laser cutting machine are water-cooled. Since the water in the air will condense into ice when the cooling water is too cold, when the cooling water temperature is too low, dew will condense on the surface of the laser and optical lens. This will greatly affect the output efficiency of the laser and the life of the optical accessories. It is recommended that the water temperature be set at 30-32 degrees, and the difference between the cooling water temperature and the room temperature should be greater than 7 degrees.

Regular maintenance of the fiber laser cutting machine can not only save economic costs, but also increase the service life of the machine. Therefore, paying attention to the maintenance of the fiber laser cutting machine can lay a good foundation for future use. Summer is coming, let us do a good job of laser cutting machine maintenance before the summer comes. If you want to know any more detailed information, you can confirm with SAN LASER staff at any time.