The problem of different depths of text and pattern marked by fiber laser marking machine - solution!

Fiber laser marking machine is a high-tech modern technology equipment, the scope of application of fiber laser marking machine equipment is relatively wide, in a variety of electronic components, building materials, etc., many words are the use of fiber laser marking machine. However, there will be some failures when this equipment is used, such as the problem of different depths of marking text and patterns. How to solve it? Why is this happening?

1. The lens is stained or bruised

Solution: If there is a stain, you can use cotton swabs and alcohol to scrub the lens, beam expanding mirror, focusing mirror, wipe the surface material can be, remember not to use hard objects to wipe the lens; If the lens has scratches or other damage then only replace the marking machine lens.

2. There is a deviation in the optical path

Solution: If the light path is deviated, you need to re-adjust the light path.

3. The marking speed is too fast and the filling method is unreasonable

Solution: Reduce the marking speed, adjust the original filling method, and determine whether the workpiece is in the above, and re-adjust the focus.

4, marking machine current problem

Solution: If the power supply current of the equipment is too small, it will also affect the depth of the marking out of the text, this time to increase the current of the laser power supply, reduce the frequency of the marking machine, so that the marking machine can operate normally, to avoid the situation of too shallow marking words.

For the fiber laser marking machine has the problem of different graphic depth, you can refer to the above several methods to solve, of course, the best way is to prevent when in use, usually pay more attention to the working state of the fiber laser marking machine, before the problem appears to eliminate the hidden dangers of the problem.