- No.609, Centre Of Huijin Nanxiang, Yinxiang Road, Nanxiang Town, Jiading District, Shanghai, China
- sherry@sanmachines.com
- +86-18616767021
How to judge the cutting quality of precision laser cutting machine?
Precision laser cutting machine has not had a very standard cutting quality until now, most of them are. After the product is cut, it is judged by this. However, it is not known that there are many factors that affect the cutting quality. In our daily use, if we are careful, we will often find these problems. The following text will give you a detailed introduction.
1. Observe the verticality
The verticality of the precision laser cutting machine, if the laser beam in the equipment is enlarged, we can see that it is actually cylindrical. When the machine is started, a focus is formed by focusing, and then it is irradiated on the metal product. If the metal material is far away from the focus, the laser beam is diffused. In this case, the cut section will become a taper according to the position of the focus. This situation is not too obvious. If the material is cut above 10 mm, then the verticality is very important.
2. Roughness of metal materials
When precision laser cutting machine cuts metal materials, especially thicker metal materials, vertical lines will be formed. The depth of the lines directly determines the degree of roughness. The shallower the lines, the smoother the bright surface, and the better the cutting quality.
3. Pay attention to the cutting process
During the cutting process of precision laser cutting machine, burrs and scraping will appear. The formation process is mainly that the laser cutting machine will generate high temperature around the metal material during operation, and the stickiness is very strong. When the metal material melts, residue will stick to the metal material. No matter which direction is cut, such burrs will be formed. Both factors can affect the cutting quality.
After the above text introduction, I believe that everyone has a certain judgment on the quality of precision laser cutting machine cutting, so here is a suggestion. Don't just pay attention to its price before buying the equipment, but also pay attention to its structural quality.